Elkay ERFP28FK Refrigerated Drinking Fountain
Model ERFP28FK Description
As per Elkay's return policy, all glass filler prepped drinking fountains are non-returnable.
Two-level barrier-free stainless steel water cooler has recessed in-the-wall refrigeration system and stainless steel grill. All stainless steel polished to a satin finish.
Fountain has contoured basin to minimize splashing. Flexi-Guard safety bubbler and easy to operate, fully functional, vandal-resistant front push button. Flow regulator provides constant stream from 20 to 105 psi water pressure. Vandal resistant bottom cover plates included.
NOTE: Minimum 40 psi supply line pressure required in special circumstances where both sides of bi-level are in use simultaneously to ensure adequate stream height. Use of water filter in this situation is not recommended.
Energy efficient refrigeration system utilizes a combination tank continuous-tube type evaporator, refrigerant drier, and capillary tube.
This Water Cooler complies with the requirements of A.D.A. (Americans with Disabilities Act) when properly installed. Unit is compliant if installed in an alcove and is also compliant when mounted on an exposed wall if a wing wall is located on the left side or if a 97258C apron is installed under upper unit.
NO LEAD DESIGN
Elkay Water Coolers are manufactured with a
waterway system utilizing copper components and completely lead-free
material. These waterways have no lead because all lead materials, such
as leaded brass, have been removed. All joints are brazed using silver
solder only. No lead solder is permitted. A strainer with an easily
cleanable screen is provided to allow trapping and convenient removal of
waterborne particulate of 140 microns and larger prior to their entry
into the water cooler.
This Water Cooler complies with the lead-free
definition in the safe drinking water act of 1986 and lead contamination
control act of 1988.
Fountain Body: #18 gauge, type 304 nickel bearing stainless steel polished to a lustrous satin finish with high shined outer edge. Contoured basin offers large strike area to minimize splashing. Fully functional front push buttons are easy to operate.
Exclusive Flexi-Guard Safety Bubbler: Innovative design
utilizes a pliable polyester elastomer to prevent accidental mouth
injuries. Flexes on impact, then returns to original position. Strong.
Abrasion-resistant. Anti-sweat. Bubbler meets UL requirements and all
sanitary codes and are keyed in location to prevent rotation.
Front Panel Grill: Made of type 304 stainless steel, polished to a uniform Elkay satin finish. Removable louvered ventilating grille encloses refrigeration unit and plumbing.
Wall Mounting Frame: MF200 frame allows flush mounting to finished wall (purchased separately)
Drain: LK464 drain and trap assembly included.
Protected by Elkay's 5 Year Limited Warranty on the refrigeration system of the unit.
Elkay Pressure-Type Water Coolers are designed to operate on 20 psi to 105 psi supply line pressure. If inlet pressure is above 105 psi, a pressure regulator must be installed in the supply line. Any damage caused by reason of connecting this product to supply line pressures lower than 20 psi or higher than 105 psi is not covered by the warranty.
Elkay ERFP28FK Water Cooler Spec Sheet