Oasis R1P Water Chiller
Oasis Model R1P is a remote drinking
water chiller shall deliver at least 1.0 gph of water at 50o F cooled from 80o
F inlet water at 90o F ambient. Evaporator shall be copper evaporator tube on
stainless steel water storage tank and both shall be encapsulated in
insulation. Total water system shall be stainless steel. R-134a refrigerant
system shall be hermetically sealed and refrigerant flow shall be capillary
tube controlled. An adjustable thermostat having an off position shall control
refrigeration system. Potable water system components shall comply with Safe
Drinking Water Act Amendments, the 1988 Lead Contamination Control Act and
shall be Certified to ANSI 61 Section 9. Chilled water capacity shall be rated
per ARI Standard 1010. Cooler shall be Listed by Underwriters Laboratories Inc.
to U.S. and Canadian safety standards. Drinking water chiller shall be Oasis model
- Powder coated galvanized steel cabinet with plastic
- Air-cooled; designed to fit under a sink.60
- Compact, economical and easily installed.
- Four foot (4') insulated power cord with NEMA 5-15
- Stainless steel storage tank.
- 1/4" OD stainless steel water tube connections.
- Welded water lines to eliminate corrosion and assure
- HFC Refrigerant R-134a.