Elkay EZSDL Drinking Fountain
(Consider the EZS8L Refrigerated Model)
Model EZSDL (Non-Refrigerated) Description
Self-contained, wall hung non-refrigerated unit (Requires outlet for power cord.)
All models have a hooded stream projector with Easy-Touch Controls that
require less than 3 pounds of force to activate. Commercial-grade
solenoid based flow control. Valve with built-in flow regulator provide
constant stream from 20 to 105 psi water pressure. Bubbler orifice fully
protected to meet all sanitary codes.
These drinking fountains comply with the requirements of A.D.A. (Americans with Disabilities Act) when properly installed. Also meets the guidelines for children's environments providing the floor to orifice height is 30" or less and proper clear floor space is provided for parallel approach. (Based on Architectural and Transportation Barriers Compliance Board final ruling.) Check Local and State Codes.
NO LEAD DESIGN
These drinking fountains are certified to be lead-free as defined by the Safe Drinking Water Act. Elkay drinking fountains are manufactured with a waterway system utilizing copper components and completely lead-free materials. These waterways have no lead because all lead materials, such as leaded brass, have been removed. All joints are brazed using silver solder only. No lead solder is permitted. A strainer with an easily cleanable screen is provided to allow trapping and convenient removal of waterborne particulate of 140 microns and larger prior to their entry into the water cooler.
Frame: Galvanized structural steel chassis supports refrigeration system and fastens to wall. Provides increased structural integrity and rigidity to cooler.
Stainless Steel Basin: One piece polished to a uniform Elkay bright luster finish. Basin has integral drain grid, embossed bubbler pad. No exposed fasteners.
Exclusive Flexi-Guard® Safety Bubbler: Innovative
design utilizes an infused anti-microbial pliable polyester elastomer to
prevent accidental mouth injuries. Flexes on impact, then returns to
original position. Strong. Abrasion-resistant. Anti-sweat. Keyed in
location to prevent rotation.
Upper Shroud: Contoured shock-absorbing, provides additional protection against accidental injury. No exposed fasteners.
Lower Shroud: One piece easy to remove and replace. Allows access to internal components from three sides.
Cabinet: Cabinet design allows for flush to wall mounting. No recess space is required.
Color Selection: Unless otherwise specified cabinet is two-tone gray on upper shroud with textured gray lower shroud. Stainless Steel lower shroud available at extra cost.
Elkay EZSDL Drinking Fountain Spec Sheet