Halsey Taylor 55897C WaterSentry VII Filter
Water Filtration 55897C Description
Designed to remove cysts, such as
cryptrosporidium and giardia, lead particles
and chlorine. Also reduces odors and
discoloration from incoming water. Filter
should be replaced every 1,500 gallons (5678
liters) or approximately one (1) year after
installation.
Features include Quick-Disconnect, 1/4 turn
installation. Automatic inlet shut-off valve that
closes when filter is removed. Outer protective
wrap. Spun Polypropylene prefilter mesh to
prevent large, coarse sediment and particles
from entering and clogging filter media.
High-grade filter is made with activated carbon
and patented ATS lead-removal media. Radial
flow-thru design provides more surface area
for untreated water while final filter mesh prevents
loose carbon from entering water. Cap
and housing shall be made of rust and corrosion
free plastic.
Designed specifically for use with the
following series of Halsey Taylor water coolers:
HAC, HACBL, WM, SCWT series, S series
and WMBL. Can also be used on OVLSER,
OVLER, HRF, RC & BFMR units but must be
mounted into the wall behind the unit's
backplate.
CANNOT be used in the HTV, SW,
WC, HBW or the unrefrigerated versions of the
HRF and OVL series.
Halsey Taylor 55897C Spec Sheet