Model 9202E Description
Model 9202E Emergency Valve (patent pending)
thermostatically mixes hot and cold water to provide a safe fluid supply
for emergency showers and eyewash equipment. Additionally, to ensure a
fail-safe water supply for emergency shower and eyewash stations, a
series of cold water by-pass valves open in the event of hot water
pressure loss. (No gauges supplied - ASSE 1071 standard recommends
gauges be placed 5 to 8 feet (1.52 to 2.44 m) downstream for the most
- A flow rate of 1 to 78 gpm (295 L) for better temperature control across the operating range
- Lowest internal pressure drop for this class of valve (advantage where supply pressure is low)
- Wax based thermostat technology for fast response time with proven highly reliable temperature control
- Highest Cold Water Bypass flow rate in the industry (64% of rated tepid flow rate)
- Modular brass design with internal check stops
- Oversized valve seats resist failures caused by foreign matter
- A new and efficient shuttle design eliminates valve sticking
- A custom funnel design improves temperature control at low flow rates
- Outlet temperature is factory set to 85° F (29° C).
- Tempered water: High temperature limit is factory set to 90° F (32° C).
- 0.4 gpm (1.5 L) cold water failure rate when tested according to ASSE 1071.
- Cold water by-pass valves are closed during normal operation, regardless of flow rate.
CSA Certified to ASSE 1071 and applicable sections of CSA B125.3.
Buy America Act Information
The vast majority of Haws products qualify under the terms of
the act. However, since different purchases often require subtly
different responses, Haws recommends that the specific document
requesting certification be sent to customer service for a specific
Industry Standards Compliant
Haws 9202E Spec Sheet