Product Information
â WARNING: This product can expose you to chemicals, which is [are] known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
Elkay RNSF82362 Rigidbilt Scullery Sink
Model RNSF82362 Description
GENERAL
Model RNSF82362 #16 gauge, type 304, stainless steel scullery sink. Seamless drawn 3-1/2" (89mm) radius coved corner construction. Full length 8" (203mm) high backsplash with 45o sloped top. 1-1/2" (38mm) wide inward sloping top channel rims. Drainboards have a conical-shaped pitch for maximum drainage. Welded areas blended into the existing satin finish.
Sink is situated on (4) stainless steel, 1-5/8" (41mm) O.D. tubular legs with cross-braces for optimal support. Adjustable bullet shaped feet. Rigidbilt sinks carry the NSF International Certification.
FEATURES
- 16 gauge, Type 304 stainless steel.
- Large die-drawn sink compartments pitched to drain.
- Seamless drawn 3 1/2" radius coved corners.
- Exposed surfaces blended into a lustrous satin finish.
- Steel channel reinforced drainboards have a conical shaped pitch for drainage.
- Optional undercoating provides a sound and condensation barrier.
- 8" high, full length backsplash with 45o sloped top to resist dirt and grime.
- 2" thick backsplash to allow for plumbing.
- Channel rim design with 1" apron, has inward sloping rim to minimize spillage.
- 3 1/2" drain opening centered in each compartment.
- Stainless steel tubular legs with cross-brace supports, 1 5/8" O.D. with up to 1" adjustable bullet shaped stainless steel feet.
- Carries NSF International certification.
Elkay RNSF82362 Commercial Sink Spec Sheet
Elkay Commercial Sink Warranty
â WARNING: This product can expose you to chemicals, which is [are] known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
Elkay RNSF82362 Rigidbilt Scullery Sink
Model RNSF82362 Description
GENERALModel RNSF82362 #16 gauge, type 304, stainless steel scullery sink. Seamless drawn 3-1/2" (89mm) radius coved corner construction. Full length 8" (203mm) high backsplash with 45o sloped top. 1-1/2" (38mm) wide inward sloping top channel rims. Drainboards have a conical-shaped pitch for maximum drainage. Welded areas blended into the existing satin finish.
Sink is situated on (4) stainless steel, 1-5/8" (41mm) O.D. tubular legs with cross-braces for optimal support. Adjustable bullet shaped feet. Rigidbilt sinks carry the NSF International Certification.
FEATURES
- 16 gauge, Type 304 stainless steel.
- Large die-drawn sink compartments pitched to drain.
- Seamless drawn 3 1/2" radius coved corners.
- Exposed surfaces blended into a lustrous satin finish.
- Steel channel reinforced drainboards have a conical shaped pitch for drainage.
- Optional undercoating provides a sound and condensation barrier.
- 8" high, full length backsplash with 45o sloped top to resist dirt and grime.
- 2" thick backsplash to allow for plumbing.
- Channel rim design with 1" apron, has inward sloping rim to minimize spillage.
- 3 1/2" drain opening centered in each compartment.
- Stainless steel tubular legs with cross-brace supports, 1 5/8" O.D. with up to 1" adjustable bullet shaped stainless steel feet.
- Carries NSF International certification.
Elkay Commercial Sink Warranty