Product Information
⚠ WARNING: This product can expose you to chemicals including lead, which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. OASIS DGM-BC-FF-GRN-US | 507698 Outdoor Bottle Filler with Split-Level Drinking Fountains, Non-Refrigerated, Forest Green
The OASIS DGM-BC-FF-GRN-US Outdoor Bottle Filler with Split-Level Drinking Fountains is a heavy-duty, three-station hydration system designed for parks, schools, campuses, athletic complexes, recreation areas, and other demanding outdoor environments. Its freestanding configuration combines a manual bottle filler with two drinking fountains positioned at different heights, helping provide convenient access for a wider range of users.
Constructed from 2.5 mm marine-grade 316 stainless steel, the DGM-BC-FF-GRN-US is built to withstand frequent public use, moisture exposure, and challenging outdoor conditions. The cabinet features a durable forest green powder-coated finish that provides added corrosion resistance while complementing landscaped and recreational settings.
The bottle filler uses independent manual push-button activation and a smooth laminar flow stream for controlled bottle filling with reduced splashing. Each drinking fountain also operates independently and includes a vandal-resistant metal water-saver bubbler designed to reduce wastewater by up to 50 percent. The one-piece bubblers are keyed into place to discourage tampering and operate within a water pressure range of 20 to 100 PSI.
Because this model is non-refrigerated and requires no electricity, it provides ambient drinking water without compressors, electrical connections, or standby energy consumption. Its simple mechanical operation helps reduce maintenance requirements and makes it suitable for outdoor locations where electrical service is unavailable or unnecessary.
A built-in 100-micron inlet strainer helps stop particles before they enter the waterway, while lead-free materials and construction support safe commercial drinking water delivery. Facilities seeking additional water treatment may add the optional OASIS Outdoor Universal Filter Kit, which is certified to reduce lead, cysts, Particulate Class I, chlorine taste and odor, and microplastics for up to 4,750 gallons. Any filter installed with the unit should be approved for outdoor use.
The removable rear access panel simplifies plumbing installation and routine service. OASIS also recommends the optional outdoor ground anchor assembly to help secure the freestanding unit. A 1-1/4-inch NPSL drainage connection is provided; the drain is not included.
When properly installed, the OASIS DGM-BC-FF-GRN-US complies with ADA accessibility requirements and is certified to NSF/ANSI 61 and NSF/ANSI 372. Its split-level fountains, durable construction, water-saving components, and electricity-free operation make it a reliable outdoor hydration solution for high-traffic commercial and public facilities.
Key Features
- Freestanding outdoor bottle filler with split-level drinking fountains
- Three independently operated hydration stations
- Manual bottle filler with push-button activation
- Laminar flow stream helps provide controlled bottle filling
- Two split-level drinking fountains for broader user accessibility
- Independent manual activation for the bottle filler and fountains
- Vandal-resistant metal water-saver bubblers
- Water-saver bubblers reduce wastewater by up to 50 percent
- One-piece bubblers keyed into place to discourage tampering
- Bubblers operate between 20 and 100 PSI
- Heavy-duty 2.5 mm marine-grade 316 stainless steel construction
- Forest green corrosion-resistant powder-coated finish
- Vandal-resistant commercial cabinet
- Built-in 100-micron inlet strainer
- Lead-free waterways and construction
- Non-refrigerated ambient water delivery
- No electricity required
- Rated at 0 watts and 0 full-load amps
- Optional outdoor filtration available
- Compatible with OASIS Outdoor Universal Filter Kit 041253-008
- Removable rear panel for installation and service access
- Optional ground anchor assembly recommended
- 1-1/4-inch NPSL drainage connection
- 63 inches high by 43.1 inches wide with a 14-inch base diameter
- 15-inch bottle filling alcove height
- ADA compliant when properly installed
- Certified to NSF/ANSI 61 and NSF/ANSI 372
- Designed for outdoor commercial and public installations
Accessible Three-Station Hydration
The split-level fountain configuration provides two drinking heights in addition to the elevated bottle filling station. This three-station design helps accommodate multiple users while supporting accessibility in busy parks, schools, recreation facilities, and public gathering areas.
Energy- and Water-Efficient Operation
The DGM-BC-FF-GRN-US operates without electricity or refrigeration, eliminating energy consumption during normal use. Manual activation allows users to control water flow, while the laminar bottle filling stream and water-saving bubblers help minimize splashing and unnecessary water waste.
Built for Demanding Outdoor Environments
Marine-grade stainless steel, vandal-resistant components, and a corrosion-resistant powder-coated finish provide dependable performance in demanding exterior installations. In areas exposed to freezing temperatures or extreme heat, the unit must be properly winterized or otherwise protected to prevent damage.
OASIS DGM-BC-FF-GRN-US | 507698 Outdoor Bottle Filler with Split-Level Drinking Fountains, Non-Refrigerated, Forest Green
The OASIS DGM-BC-FF-GRN-US Outdoor Bottle Filler with Split-Level Drinking Fountains is a heavy-duty, three-station hydration system designed for parks, schools, campuses, athletic complexes, recreation areas, and other demanding outdoor environments. Its freestanding configuration combines a manual bottle filler with two drinking fountains positioned at different heights, helping provide convenient access for a wider range of users.
Constructed from 2.5 mm marine-grade 316 stainless steel, the DGM-BC-FF-GRN-US is built to withstand frequent public use, moisture exposure, and challenging outdoor conditions. The cabinet features a durable forest green powder-coated finish that provides added corrosion resistance while complementing landscaped and recreational settings.
The bottle filler uses independent manual push-button activation and a smooth laminar flow stream for controlled bottle filling with reduced splashing. Each drinking fountain also operates independently and includes a vandal-resistant metal water-saver bubbler designed to reduce wastewater by up to 50 percent. The one-piece bubblers are keyed into place to discourage tampering and operate within a water pressure range of 20 to 100 PSI.
Because this model is non-refrigerated and requires no electricity, it provides ambient drinking water without compressors, electrical connections, or standby energy consumption. Its simple mechanical operation helps reduce maintenance requirements and makes it suitable for outdoor locations where electrical service is unavailable or unnecessary.
A built-in 100-micron inlet strainer helps stop particles before they enter the waterway, while lead-free materials and construction support safe commercial drinking water delivery. Facilities seeking additional water treatment may add the optional OASIS Outdoor Universal Filter Kit, which is certified to reduce lead, cysts, Particulate Class I, chlorine taste and odor, and microplastics for up to 4,750 gallons. Any filter installed with the unit should be approved for outdoor use.
The removable rear access panel simplifies plumbing installation and routine service. OASIS also recommends the optional outdoor ground anchor assembly to help secure the freestanding unit. A 1-1/4-inch NPSL drainage connection is provided; the drain is not included.
When properly installed, the OASIS DGM-BC-FF-GRN-US complies with ADA accessibility requirements and is certified to NSF/ANSI 61 and NSF/ANSI 372. Its split-level fountains, durable construction, water-saving components, and electricity-free operation make it a reliable outdoor hydration solution for high-traffic commercial and public facilities.
Key Features
- Freestanding outdoor bottle filler with split-level drinking fountains
- Three independently operated hydration stations
- Manual bottle filler with push-button activation
- Laminar flow stream helps provide controlled bottle filling
- Two split-level drinking fountains for broader user accessibility
- Independent manual activation for the bottle filler and fountains
- Vandal-resistant metal water-saver bubblers
- Water-saver bubblers reduce wastewater by up to 50 percent
- One-piece bubblers keyed into place to discourage tampering
- Bubblers operate between 20 and 100 PSI
- Heavy-duty 2.5 mm marine-grade 316 stainless steel construction
- Forest green corrosion-resistant powder-coated finish
- Vandal-resistant commercial cabinet
- Built-in 100-micron inlet strainer
- Lead-free waterways and construction
- Non-refrigerated ambient water delivery
- No electricity required
- Rated at 0 watts and 0 full-load amps
- Optional outdoor filtration available
- Compatible with OASIS Outdoor Universal Filter Kit 041253-008
- Removable rear panel for installation and service access
- Optional ground anchor assembly recommended
- 1-1/4-inch NPSL drainage connection
- 63 inches high by 43.1 inches wide with a 14-inch base diameter
- 15-inch bottle filling alcove height
- ADA compliant when properly installed
- Certified to NSF/ANSI 61 and NSF/ANSI 372
- Designed for outdoor commercial and public installations
Accessible Three-Station Hydration
The split-level fountain configuration provides two drinking heights in addition to the elevated bottle filling station. This three-station design helps accommodate multiple users while supporting accessibility in busy parks, schools, recreation facilities, and public gathering areas.
Energy- and Water-Efficient Operation
The DGM-BC-FF-GRN-US operates without electricity or refrigeration, eliminating energy consumption during normal use. Manual activation allows users to control water flow, while the laminar bottle filling stream and water-saving bubblers help minimize splashing and unnecessary water waste.
Built for Demanding Outdoor Environments
Marine-grade stainless steel, vandal-resistant components, and a corrosion-resistant powder-coated finish provide dependable performance in demanding exterior installations. In areas exposed to freezing temperatures or extreme heat, the unit must be properly winterized or otherwise protected to prevent damage.
